NYCWY

Power cable 0,6/1 kV, PVC insulated and sheathed with corrugated concentric protective Cu conductor

JUS mark:PP40

NYCWY
Application

Application

Standards
 

Distribution power cable for static application, mostly in ground, but also in water, within facilities, in cable canals, in concrete, in conditions requiring increased electric protection and protection against mechanical damages. Used in electric power plants, transformer stations, industrial plants, metropolitan networks and other electric plants. Concentric conductor can be used as neutral, protective or earth connection, and if there is a danger of damages caused by digging, it acts as protection against contact voltage, in case of rough insulation damage. Corrugated concentric conductor construction enables establishing of several cable connections without conductor cutting.

HRN HD 603 S1
IEC 60502-1
DIN VDE 0276 part 603
Datasheet NYCWY 117.09 Kb
Construction

Construction

 Technical data

Technical data
Conductor: Cu, class 1 or 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295
class 1: solid, round (RE)
class 2: multi wire stranded, round (RM) or sector (SM), multi wire exceeding 50 mm² are compacted
Insulation: PVC compound DIV-4 acc. to HRN HD 603.1, concentrically stranded cores, colour marked acc. to HRN HD 308 S2 / VDE 0293-308, without protective yellow-green conductor
Filler: spouted elastomer or plastomer compound or wrapped thermoplastic tapes
Concentric conductor: in inner layer corrugated spirally wrapped copper wires, in external layer copper tape wrapped in counter-helix
Sheath: PVC compound DMV-5 acc. to HRN HD 603.1
sheath colour: black
Izvedba.jpg
 
Core colour marking: HRN HD 308 S2 / VDE 0293-308
NYMboja.jpg
Temperature range:  
during installation:
 -5 °C up to +50 °C
fixed installed: -30 °C up to +70 °C
at short circuit of max. 5 s: up to 160 °C
Nominal voltage: Uο/U = 0,6/1 kV
Test voltage: 4 kV
Max. operating voltage in three-phase systems: 1,2 kV
Maximal tensile strength: 50 N/mm²
Behaviour in fire: IEC 60332-1
Minimal inner bending radius:  
single core: 15D
multi core: 12D

Dimensions – number of cores x conductor cross-section Construction Construction of individual conductor External diameter Insulation thickness Sheath thickness Conductor resistance at 20 °C Short circuit current 1s Cu weight Cable weight Packing*
    nominal min-max. nominal nominal max. nom.   prib.  
N x mm²   n x mm mm mm mm Ω/km kA kg/km kg/km  
2 x 10/10 RE 1 x 3,56 19 - 22 1,0 1,8 1,83 1,15 312 610 CUT
2 x 16/16 RE 1 x 4,51 20 - 23 1,0 1,8 1,15 1,84 489 840 CUT
 
3 x 10/10 RE 1 x 3,56 18 - 22 1,0 1,8 1,83 1,15 408 750 CUT
3 x 16/16 RE 1 x 4,51 20 - 24 1,0 1,8 1,15 1,84 643 1050 CUT
3 x 25/16 RM 7 x 2,13 25 - 31 1,2 1,8 0,73 2,87 902 1600 CUT
3 x 25/25 RM 7 x 2,13 25 - 31 1,2 1,8 0,73 2,87 1003 1600 CUT
3 x 35/16 SM 7 x 2,52 25 - 31 1,2 1,8 0,54 4,02 1190 1700 CUT
3 x 35/35 SM 7 x 2,52 25 - 31 1,2 1,8 0,54 4,02 1402 1850 CUT
3 x 50/25 SM 19 x 1,83 26 - 33 1,4 1,9 0,39 5,75 1723 2300 CUT
3 x 50/50 SM 19 x 1,83 26 - 33 1,4 1,8 0,39 5,75 2000 2400 CUT
3 x 70/35 SM 19 x 2,17 30 - 37 1,4 2,0 0,27 8,05 2410 2900 CUT
3 x 70/70 SM 19 x 2,17 31 - 38 1,4 2,0 0,27 8,05 2796 3300 CUT
3 x 95/50 SM 19 x 2,52 35 - 42 1,6 2,2 0,19 10,9 3296 4000 CUT
3 x 95/95 SM 19 x 2,52 37 - 44 1,6 2,2 0,19 10,9 3791 4500 CUT
3 x 120/70 SM 37 x 2,03 38 - 45 1,6 2,3 0,15 13,8 4236 5000 CUT
3 x 120/120 SM 37 x 2,03 38 - 45 1,6 2,3 0,15 13,8 4786 5500 CUT
3 x 150/70 SM 37 x 2,27 42 - 49 1,8 2,4 0,12 17,2 5100 6000 CUT
3 x 150/150 SM 37 x 2,27 43 - 50 1,8 2,4 0,12 17,2 5970 6750 CUT
3 x 185/95 SM 37 x 2,52 47 - 54 2,0 2,6 0,10 21,3 6383 7500 CUT
3 x 240/120 SM 61 x 2,24 52 - 59 2,2 2,8 0,08 27,6 8242 10000 CUT
 
4 x 10/10 RE 1 x 3,56 19 - 23 1,0 1,8 1,83 1,15 504 870 CUT
4 x 16/16 RE 1 x 4,51 21 - 25 1,0 1,8 1,15 1,84 796 1250 CUT
4 x 25/16 RM 7 x 2,13 25 - 32 1,2 1,8 0,73 2,87 1142 1800 CUT
4 x 35/16 SM 7 x 2,52 26 - 33 1,2 1,8 0,54 4,02 1526 2050 CUT
4 x 50/25 SM 19 x 1,83 29 - 36 1,4 2,0 0,39 5,75 2203 2700 CUT
4 x 70/35 SM 19 x 2,17 34 - 41 1,4 2,1 0,27 8,05 3082 3750 CUT
4 x 95/50 SM 19 x 2,52 34 - 41 1,6 2,3 0,19 10,9 4208 5000 CUT
4 x 120/70 SM 37 x 2,03 43 - 50 1,6 2,4 0,15 13,8 5388 6300 CUT
4 x 150/70 SM 37 x 2,27 47 - 54 1,8 2,6 0,12 17,2 6540 7600 CUT
4 x 185/95 SM 37 x 2,52 55 - 62 2,0 2,7 0,10 21,3 8159 9300 CUT
4 x 240/120 SM 61 x 2,24 62 - 70 2,2 2,9 0,08 27,6 10546 11600 CUT

*) Packing: CUT = cable in different lengths on drum or reel, possible cutting at required length


Products




Proizvodi