NHXH FE180/E90

Halogen-free power and signal cable 0,6/1 kV, with improved properties under fire, and 90-minute retained electric functionality

 
NHXH FE180/E90
Application

Application

Standards
 

NHXH cables suitable for fixed installation in dry and damp environment, on or under plaster, on cable trays, same as in walls and concrete. Not intended for direct laying in ground or water. For outdoor application can be laid in tubes, but in that case should be taken all precautionary measures necessary to prevent water penetration into the tubes. Suitable for electric installations with marked fire-fighting and function preserving requirements, for alarm systems, fire sensors, evacuation elevators and other supply systems in an emergency. Appropriate for application in all situations where people and material goods need to be protected in case of fire. Recommended for public buildings frequented by a lot of people, and for buildings of high material value, for industrial complexes, electric power plants, transformer stations, municipal facilities, hotels, shopping malls, hospitals, schools, airports, underground railways and similar. Important - NHXH cables should not be laid on common trays, but on fire-resistant trays which retain their geometry in case of fire. Keeping NHXH cables in the same position in case of fire, enables additional protection of cable conductivity, by means of the mineral layer discharged around the cable at increased temperature.

advantages:
- halogen-free, no release of toxic or corrosive gases under fire
- reduced smoke occurrence under fire
- no flame propagation in vertical cable bundle
- preserved electric function of the system within set time period

DIN VDE 0266
FE180: IEC 60331
DIN VDE 0472 part 814
E30: DIN 4102 part 12

Datasheet NHXH_FE180/E90
Construction

Construction

 Technical data

Technical data
Conductor: Cu, class 1 or 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295
class 1: solid, round (RE)
class 2: multi wire stranded, round (RM) or sector (SM)
Insulation 1: mica tape, fire resistant halogen-free dielectric
Insulation 2: cross-linked halogen-free polymer, HXI1 acc. to VDE 0266, concentrically stranded cores, colour marked acc. to HRN HD 308 S2 / VDE 0293-308, with or without yellow-green protective conductor
Filler: filler applied in multi core, extruded halogen-free polymer or lapped glass fibres
Sheath: cross-linked thermoplastic halogen-free flame retardant polyolefin bond, HM1 or HM4 acc. to HD 604 S1 and VDE 0276-604
sheath colour: orange
 
Core colour marking: acc. to HRN HD 308 S2 / VDE 0293-308
NYMboja.jpg
Temperature range:  
during installation:
 -5 °C up to +50 °C
fixed installed: -15 °C up to +90 °C
max. operating temperature: 90 °C
at short circuit of max. 5 s: up to 250 °C
Nominal voltage: Uο/U = 0,6/1 kV
Test voltage: 4 kV
Max. tensile strength of Cu conductor: 50 N/mm²
Minimal inner bending radius:  
single wire cables: 15D
multi wire cables: 12D
Flame retardant: IEC 60332-1
No flame propagation in vertical cable bundle: IEC 60332-3
Halogen-free: IEC 60754-1
Non-corrosive combustion gases: IEC 60754-2
Low smoke density: IEC 61034-2
Insulation integrity under fire, no short circuit FE180 – fire-resistant: IEC 60331
Circuit integrity under fire - E90: acc. to DIN 4102 part 12, 90 minutes

Power NHXH-JZ, NHXH-OZ

Dimensions – number of cores x conductor cross-section Construction Construction of individual conductor External diameter Fire load Specific inductance Conductor resistance at 20 °C Conductor resistance at 90 °C Cable weight Packing*
    nominal approx.   nominal max. max. approx.  
N x mm²                
1 x 1,5 RE 1 x 1,38 6,2 0,17 0,351 12,1000 15,403 57 CUT
1 x 2,5 RE 1 x 1,78 6,6 0,19 0,312 7,4100 9,433 71 CUT
1 x 4 RE 1 x 2,25 7,1 0,21 0,280 4,6100 5,869 90 CUT
1 x 6 RE 1 x 2,76 7,6 0,23 0,253 3,0800 3,921 113 CUT
1 x 10 RE 1 x 3,56 8,4 0,27 0,221 1,8300 2,330 158 CUT
1 x 16 RM 7 x 1,70 10,2 0,35 0,193 1,1500 1,464 243 CUT
1 x 25 RM 7 x 2,13 11,7 0,43 0,180 0,7270 0,925 347 CUT
1 x 35 RM 7 x 2,52 12,8 0,49 0,165 0,5240 0,667 449 CUT
1 x 50 RM 19 x 1,83 14,3 0,58 0,159 0,3870 0,493 589 CUT
1 x 70 RM 19 x 2,17 16,1 0,67 0,143 0,2680 0,341 810 CUT
1 x 95 RM 19 x 2,52 18,5 0,85 0,138 0,1930 0,246 1090 CUT
1 x 120 RM 37 x 2,03 19,6 0,91 0,132 0,1530 0,195 1318 CUT
1 x 150 RM 37 x 2,27 21,8 1,11 0,130 0,1240 0,158 1648 CUT
1 x 185 RM 37 x 2,52 24,0 1,32 0,129 0,0991 0,126 2029 CUT
1 x 240 RM 61 x 2,24 27,2 1,63 0,124 0,0754 0,096 2658 CUT
1 x 300 RM 61 x 2,50 29,6 1,91 0,123 0,0601 0,077 3166 CUT
 
2 x 1,5 RE 1 x 1,38 11,0 0,48 0,739 12,1000 15,403 178 CUT
2 x 2,5 RE 1 x 1,78 11,8 0,54 0,681 7,4100 9,433 217 CUT
2 x 4 RE 1 x 2,25 12,8 0,62 0,637 4,6100 5,869 272 CUT
2 x 6 RE 1 x 2,76 13,8 0,70 0,599 3,0800 3,921 337 CUT
2 x 10 RE 1 x 3,56 15,4 0,83 0,558 1,8300 2,330 459 CUT
2 x 16 RM 7 x 1,70 19,0 1,19 0,535 1,1500 1,464 714 CUT
2 x 25 RM 7 x 2,13 22,0 1,54 0,529 0,7270 0,925 1011 CUT
2 x 35 RM 7 x 2,52 24,2 1,79 0,509 0,5240 0,667 1287 CUT
2 x 50 RM 19 x 1,83 28,0 2,35 0,508 0,3870 0,493 1742 CUT
2 x 70 RM 19 x 2,17 31,6 2,86 0,488 0,2680 0,341 2346 CUT
2 x 95 RM 19 x 2,52 36,2 3,67 0,483 0,1930 0,246 3130 CUT
2 x 120 RM 37 x 2,03 38,6 4,11 0,475 0,1530 0,195 3729 CUT
2 x 150 RM 37 x 2,27 43,0 5,07 0,475 0,1240 0,158 4655 CUT
2 x 185 RM 37 x 2,52 47,2 6,05 0,474 0,0991 0,126 5690 CUT
2 x 240 RM 61 x 2,24 53,6 7,66 0,469 0,0754 0,096 7431 CUT
2 x 300 RM 61 x 2,50 58,2 8,95 0,468 0,0601 0,077 8817 CUT
 
3 x 1,5 RE 1 x 1,38 11,5 0,53 0,369 12,1000 15,403 200 CUT
3 x 2,5 RE 1 x 1,78 12,4 0,60 0,341 7,4100 9,433 250 CUT
3 x 4 RE 1 x 2,25 13,5 0,68 0,318 4,6100 5,869 319 CUT
3 x 6 RE 1 x 2,76 14,6 0,77 0,300 3,0800 3,921 403 CUT
3 x 10 RE 1 x 3,56 16,3 0,91 0,279 1,8300 2,330 560 CUT
3 x 16 RM 7 x 1,70 20,2 1,29 0,267 1,1500 1,464 878 CUT
3 x 25 RM 7 x 2,13 24,0 1,75 0,264 0,7270 0,925 1299 CUT
3 x 35 RM 7 x 2,52 26,4 2,02 0,255 0,5240 0,667 1664 CUT
3 x 50 RM 19 x 1,83 29,8 2,51 0,254 0,3870 0,493 2189 CUT
3 x 70 RM 19 x 2,17 33,9 3,09 0,244 0,2680 0,341 2997 CUT
3 x 95 RM 19 x 2,52 38,9 3,95 0,242 0,1930 0,246 4007 CUT
3 x 120 RM 37 x 2,03 41,5 4,39 0,238 0,1530 0,195 4812 CUT
3 x 150 RM 37 x 2,27 46,0 5,32 0,237 0,1240 0,158 5988 CUT
3 x 185 RM 37 x 2,52 50,7 6,44 0,237 0,0991 0,126 7363 CUT
3 x 240 RM 61 x 2,24 57,6 8,10 0,234 0,0754 0,096 9632 CUT
3 x 300 RM 61 x 2,50 62,7 9,57 0,234 0,0601 0,077 11469 CUT
 
3 x 25 + 16     25,4 1,91   0,7270 0,925 1490 CUT
3 x 35 + 17     27,4 2,13   0,5240 0,667 1833 CUT
3 x 50 + 25     31,3 2,69   0,3870 0,493 2457 CUT
3 x 70 + 35     35,6 3,34   0,2680 0,341 3362 CUT
 
3 x 95 + 50     40,7 4,24   0,1930 0,246 4488 CUT
3 x 120 + 70     44,0 4,82   0,1530 0,195 5532 CUT
3 x 150 + 70     48,0 5,70   0,1240 0,158 6666 CUT
3 x 185 + 95     53,4 7,00   0,0990 0,126 8315 CUT
 
4 x 1,5 RE 1 x 1,38 12,4 0,61 0,438 12,1000 15,403 234 CUT
4 x 2,5 RE 1 x 1,78 13,4 0,69 0,410 7,4100 9,433 296 CUT
4 x 4 RE 1 x 2,25 14,6 0,78 0,387 4,6100 5,869 381 CUT
4 x 6 RE 1 x 2,76 15,8 0,90 0,369 3,0800 3,921 490 CUT
4 x 10 RE 1 x 3,56 17,8 1,07 0,348 1,8300 2,330 695 CUT
4 x 16 RM 7 x 1,70 22,1 1,54 0,336 1,1500 1,464 1089 CUT
4 x 25 RM 7 x 2,13 26,3 2,05 0,333 0,7270 0,925 1618 CUT
4 x 35 RM 7 x 2,52 29,0 2,36 0,324 0,5240 0,667 2083 CUT
4 x 50 RM 19 x 1,83 32,8 2,97 0,323 0,3870 0,493 2752 CUT
4 x 70 RM 19 x 2,17 37,6 3,55 0,313 0,2680 0,341 3804 CUT
4 x 95 RM 19 x 2,52 43,1 4,75 0,311 0,1930 0,246 5092 CUT
4 x 120 RM 37 x 2,03 46,0 5,27 0,307 0,1530 0,195 6133 CUT
4 x 150 RM 37 x 2,27 51,2 6,49 0,306 0,1240 0,158 7662 CUT
4 x 185 RM 37 x 2,52 56,5 7,85 0,306 0,0991 0,126 9425 CUT
4 x 240 RM 61 x 2,24 64,1 9,85 0,303 0,0754 0,096 12334 CUT
4 x 300 RM 61 x 2,50 69,8 11,61 0,303 0,0601 0,077 14685 CUT
 
5 x 1,5 RE 1 x 1,38 13,4 0,71 0,447 12,1000 15,403 278 CUT
5 x 2,5 RE 1 x 1,78 14,5 0,81 0,419 7,4100 9,433 353 CUT
5 x 4 RE 1 x 2,25 15,8 0,93 0,396 4,6100 5,869 456 CUT
5 x 6 RE 1 x 2,76 17,2 1,05 0,378 3,0800 3,921 589 CUT
5 x 10 RE 1 x 3,56 19,3 1,25 0,357 1,8300 2,330 832 CUT
5 x 16 RM 7 x 1,70 24,8 1,86 0,345 1,1500 1,464 1361 CUT
5 x 25 RM 7 x 2,13 28,8 2,42 0,342 0,7270 0,925 1960 CUT
5 x 35 RM 7 x 2,52 32,0 2,86 0,333 0,5240 0,667 2547 CUT
5 x 50 RM 19 x 1,83 36,5 3,68 0,332 0,3870 0,493 3392 CUT
5 x 70 RM 19 x 2,17 41,5 4,51 0,313 0,2680 0,341 4667 CUT
5 x 95 RM 19 x 2,52 47,9 5,88 0,311 0,1930 0,246 6278 CUT
5 x 120 RM 37 x 2,03 51,0 6,50 0,307 0,1530 0,195 7563 CUT
5 x 150 RM 37 x 2,27 56,8 8,00 0,306 0,1240 0,158 9450 CUT
5 x 185 RM 37 x 2,52 62,6 9,66 0,306 0,0991 0,126 11622 CUT
5 x 240 RM 61 x 2,24 71,1 12,12 0,303 0,0754 0,096 15213 CUT
5 x 300 RM 61 x 2,50             CUT

Signal NHXH-JZ, NHXH-OZ

Dimensions – number of cores x conductor cross-section Construction Construction of individual conductor External diameter Conductor diameter Fire load Conductor resistance at 20 °C Conductor resistance at 90 °C Cable weight Packing*
    nominal approx. nominal   max. max. approx.  
N x mm²   n x mm mm mm kwh/m Ω/km Ω/km kg/km  
6 x 1,5 RE 1 x 1,38 14,4 1,38 0,82 12,10 15,403 320 CUT
7 x 1,5 RE 1 x 1,39 15,8 1,38 0,81 12,10 15,403 331 CUT
8 x 1,5 RE 1 x 1,40 15,6 1,38 0,92 12,10 15,403 388 CUT
9 x 1,5 RE 1 x 1,41 16,6 1,38 1,00 12,10 15,403 433 CUT
10 x 1,5 RE 1 x 1,42 17,8 1,38 1,09 12,10 15,403 457  
12 x 1,5 RE 1 x 1,43 18,3 1,38 1,20 12,10 15,403 513 CUT
14 x 1,5 RE 1 x 1,44 19,2 1,38 1,34 12,10 15,403 586 CUT
16 x 1,5 RE 1 x 1,45 20,2 1,38 1,46 12,10 15,403 645 CUT
19 x 1,5 RE 1 x 1,46 21,2 1,38 1,63 12,10 15,403 715 CUT
21 x 1,5 RE 1 x 1,47 22,4 1,38 1,74 12,10 15,403 789 CUT
24 x 1,5 RE 1 x 1,48 24,6 1,38 1,99 12,10 15,403 901 CUT
27 x 1,5 RE 1 x 1,49 25,1 1,38 2,12 12,10 15,403 972 CUT
30 x 1,5 RE 1 x 1,50 26,0 1,38 2,28 12,10 15,403 1057 CUT
33 x 1,5 RE 1 x 1,51 27,0 1,38 2,48 12,10 15,403 1155 CUT
37 x 1,5 RE 1 x 1,52 28,2 1,38 2,72 12,10 15,403 1276 CUT
40 x 1,5 RE 1 x 1,53 29,6 1,38 2,97 12,10 15,403 1409 CUT
 
6 x 2,5 RE 1 x 1,78 15,6 1,78 0,93 7,41 9,433 408 CUT
7 x 2,5 RE 1 x 1,78 17,7 1,78 0,92 7,41 9,433 426 CUT
8 x 2,5 RE 1 x 1,78 16,9 1,78 1,04 7,41 9,433 499 CUT
9 x 2,5 RE 1 x 1,78 18,1 1,78 1,13 7,41 9,433 562 CUT
10 x 2,5 RE 1 x 1,78 19,4 1,78 1,24 7,41 9,433 593 CUT
12 x 2,5 RE 1 x 1,78 20,0 1,78 1,37 7,41 9,433 675 CUT
14 x 2,5 RE 1 x 1,78 21,0 1,78 1,54 7,41 9,433 776 CUT
16 x 2,5 RE 1 x 1,78 22,1 1,78 1,67 7,41 9,433 854 CUT
19 x 2,5 RE 1 x 1,78 23,2 1,78 1,83 7,41 9,433 953 CUT
21 x 2,5 RE 1 x 1,78 24,5 1,78 1,97 7,41 9,433 1050 CUT
24 x 2,5 RE 1 x 1,78 27,0 1,78 2,27 7,41 9,433 1205 CUT
27 x 2,5 RE 1 x 1,78 27,6 1,78 2,43 7,41 9,433 1311 CUT
30 x 2,5 RE 1 x 1,78 28,8 1,78 2,68 7,41 9,433 1446 CUT
33 x 2,5 RE 1 x 1,78 30,1 1,78 2,94 7,41 9,433 1594 CUT
37 x 2,5 RE 1 x 1,78 31,4 1,78 3,21 7,41 9,433 1757 CUT
40 x 2,5 RE 1 x 1,78 32,7 1,78 3,44 7,41 9,433 1909 CUT
 
6 x 4 RE 1 x 2,25 17,1 2,25 1,08 4,61 5,869 534 CUT
7 x 4 RE 1 x 2,25 20,3 2,25 1,05 4,61 5,869 563 CUT
8 x 4 RE 1 x 2,25 18,6 2,25 1,20 4,61 5,869 662 CUT
9 x 4 RE 1 x 2,25 19,9 2,25 1,30 4,61 5,869 743 CUT
10 x 4 RE 1 x 2,25 21,4 2,25 1,43 4,61 5,869 788 CUT
12 x 4 RE 1 x 2,25 22,1 2,25 1,59 4,61 5,869 905 CUT
 
6 x 6 RE 1 x 2,76 18,6 2,76 1,22 3,08 3,921 688 CUT
7 x 6 RE 1 x 2,77 22,7 2,76 1,19 3,08 3,921 732 CUT
 
6 x 10 RE 1 x 3,56 21,0 3,57 1,47 1,83 2,330 983 CUT
7 x 10 RE 1 x 3,57 26,7 3,57 1,41 1,83 2,330 1057 CUT

*) Packing: CUT = cable in different lengths on drum or reel, possible cutting at required length


Products




Proizvodi