JEB-H(St)H FE180 E30-E90Halogen-free fire alarm installation cable with improved properties under fire, and retained circuit integrity between 30 and 90 minutes |
|
H.jpg "JEB-H(St)H FE180 E30-E90") |
|
 |
Application |
Standards |
|
Halogen-free fire alarm installation cable with improved properties under fire, applied in measurement, data and control systems. Electrostatic screen protects transmission circuits against external disturbing electromagnetic impacts. Suitable for fixed installation in dry or damp premises where people and material goods need to be protected in case of fire. Recommended for public and industrial facilities where a lot of people is gathering, and for facilities of high material value. Not for direct laying in ground or water, not for outdoor application (except when adequately protected against sunlight), not intended for supply purposes. The cable is safe acc. to 180-minute test – insulation remains compact under the impact of open flame during the entire test period of 180 minutes. Retained circuit integrity 30 or 90 minutes, depending on installation technique. E30: Cable enables a 30-minute circuit integrity under fire, enough for evacuation of people and animals from the building under fire. During the period of 30 minutes enables functioning of alarm systems, panic lighting, passenger elevators for evacuation purposes, excepting cables installed within pit ladders and engine-rooms. E90: Cable enables a 90-minute circuit integrity under fire, in submarine stations under increased pressure for the purpose of avoiding smoke and increased temperature on safety steps and inner rooms, pit ladders and engine-rooms, elevators for fire-fighting brigades, and hospital elevators.
advantages: |
DIN VDE 0815 |
 |
JEB-H(St)H FE180 E30-E90 |
 |
Construction |
 |
Technical data |
| Conductor: | bare solid copper conductor, of 0,8 mm diameter | |
| Insulation: | cross-linked halogen-free polymer (at some producers also mica tape as first insulation layer of high fire resistant properties), per two conductors are twisted in pair, each four pairs are stranded in bundle, and bundles are stranded in layers, bundles can be marked by wrapped numbered film, core colour marking is defined acc. to DIN VDE 0815 for industrial electronic cables – by basic insulation colour and by colour and group of rings on insulation | |
| Separator: | PEPT - plastic tape of poly (ethylene/propylene) or polyester tape | |
| Electrostatic screen: | aluminium - laminated polyester tape and tinned copper contact conductor of 0,8 mm diameter (of 0,5 mm² cross-section) | |
| Sheath: | cross-linked thermoplastic halogen-free flame retardant polyolefin bond HM2 acc. to HD 604 S1 and VDE 0207 part 24 | |
| sheath colour: | red | |
| Temperature range: | |
| during installation: |
-5 °C up to +50 °C |
| fixed installed: | -30 °C up to +70 °C |
| Operating voltage: | max. 225 V |
| Test voltage: | |
| core - core: | 500 V |
| core - screen: | 2000 V |
| Loop resistance at 20°C: | max. 73,2 Ω/km |
| Insulation resistance: | min. 100 MΩxkm |
| Mutual capacitance: | (at 800 Hz) max. 1201) nF/km |
| Mutual capacitance: | (at 800 Hz) max. 200 pF/100m |
| Inductance: | oko 0,65 mH/km |
| Linear attenuation: | (at 800 Hz) approx. 1,2 dB/km |
| Flame retardant: | IEC 60332-1 |
| No flame propagation in vertical cable bundle: | IEC 60332-3 |
| Halogen-free: | IEC 60754-1 |
| Non-corrosive combustion gases: | IEC 60754-2 |
| Low smoke density: | IEC 61034-2 |
| Insulation integrity under fire, no short circuit: | IEC 60331 |
| Circuit integrity under fire E30-E90: | acc. to DIN 4102 part 12, 30-90 minutes |
| Dimensions - number of cores x conductor diameter |
External diameter | Insulation thickness | Fire load | Cu weight | Cable weight | Packing* |
| approx. | nominal | approx. | ||||
| N x mm² | mm | mm | kWh/m | kg/km | kg/km | |
| 1 x 2 x 0,8 | 5,5 | 0,3 | 0,095 | 15 | 40 | CUT |
| 2 x 2 x 0,8 | 6,0 | 0,3 | 0,123 | 25 | 56 | CUT |
| 4 x 2 x 0,8 | 8,7 | 0,3 | 0,21 | 45 | 96 | CUT |
| 8 x 2 x 0,8 | 13,7 | 0,3 | 0,520 | 85 | 218 | CUT |
| 12 x 2 x 0,8 | 14,6 | 0,3 | 0,580 | 126 | 270 | CUT |
| 16 x 2 x 0,8 | 16,0 | 0,3 | 0,690 | 166 | 337 | CUT |
| 20 x 2 x 0,8 | 18,0 | 0,3 | 0,800 | 206 | 403 | CUT |
| 32 x 2 x 0,8 | 21,8 | 0,3 | 1,020 | 326 | 570 | CUT |
| 40 x 2 x 0,8 | 25,3 | 0,3 | 1,380 | 407 | 739 | CUT |
| 52 x 2 x 0,8 | 27,6 | 0,3 | 1,590 | 529 | 906 | CUT |
*) Packing: CUT = cable in different lengths on drum or reel, possible cutting at required length
